This device is a slicing instrument designed for quite a lot of duties, characterised by its segmented blade that enables for simple snapping off of lifeless segments to disclose a recent, sharp edge. Its building incorporates a strong deal with, usually with an ergonomic design, to boost grip and management throughout use. The mannequin designation specifies specific options reminiscent of blade width, general dimensions, and the producer’s designation for a particular product line recognized for its sturdiness and efficiency.
The utility of such a instrument lies in its capacity to take care of a constantly sharp slicing floor with out the necessity for sharpening. This function reduces downtime and enhances effectivity throughout a variety of purposes, from building and DIY initiatives to basic objective slicing duties. Its improvement displays an evolution in slicing device design, prioritizing person comfort, security, and longevity. The particular mannequin usually represents developments in supplies and building methods, bettering its resistance to put on and tear in demanding environments.
The next sections will element the parts, functionalities, and purposes of such a device, offering a complete overview of its options and its function throughout various industries.
1. Blade segmentation
Blade segmentation is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design function instantly influences the device’s usability, upkeep, and general lifespan, contributing considerably to its attraction in each skilled and DIY purposes.
-
Constant Sharpness
The segmented blade design permits the person to reveal a recent, sharp leading edge by snapping off a boring phase. This eliminates the necessity for sharpening, sustaining constant slicing efficiency all through the blade’s lifespan. As an example, when slicing by means of drywall or cardboard, the preliminary phase might turn into blunt; snapping it off instantly restores optimum slicing functionality.
-
Blade Financial system and Longevity
The segmented design successfully extends the lifetime of the blade. As an alternative of discarding a blade when it turns into boring in a single space, solely the worn phase is eliminated, maximizing the utility of your entire blade. This design facet will increase the product’s worth proposition by lowering the frequency of blade replacements. Utilizing the total potential of the blade reduces waste and creates value effectivity.
-
Security Issues
Whereas blade segmentation supplies benefits, it additionally introduces particular security issues. The act of snapping off a phase requires cautious execution to stop harm. The uncovered blade edge after snapping will be significantly sharp and requires warning. The design of the snap-off mechanism itself have to be sturdy to make sure the blade breaks cleanly and predictably. Poor-quality instruments with unreliable snap-off mechanisms can pose a security hazard.
-
Materials Composition and Manufacturing
The effectiveness of blade segmentation is contingent upon the fabric composition and manufacturing technique of the blade. Excessive-quality metal and exact segmentation are important for clear, predictable breaks. The particular metal used within the Stanley 10-817 25mm FatMax Xtreme is chosen for its capacity to take care of sharpness and snap cleanly alongside the pre-scored traces.
In abstract, blade segmentation is integral to the design and performance of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design impacts the device’s usability, upkeep necessities, security issues, and general financial worth. These components collectively affect its widespread adoption throughout various person teams.
2. Ergonomic deal with
The ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme snap-off knife represents an important design ingredient that instantly impacts person expertise, security, and effectivity. Its significance stems from the extended and sometimes repetitive nature of duties for which such instruments are employed. A poorly designed deal with can result in discomfort, hand fatigue, and an elevated threat of harm, whereas an ergonomically sound design mitigates these dangers, permitting for prolonged use and enhanced precision. The FatMax Xtreme sequence, particularly, emphasizes a deal with designed for a safe and comfy grip, even below demanding situations.
The form, materials, and floor texture of the deal with all contribute to its ergonomic properties. Contoured grips that conform to the pure form of the hand cut back pressure on particular stress factors. Overmolded supplies, reminiscent of rubber or textured polymers, improve grip and stop slippage, significantly in moist or oily situations. The deal with’s measurement can be essential; it have to be giant sufficient to supply enough buy however not so giant as to trigger hand fatigue. As an example, tradespeople steadily use these knives for slicing supplies like drywall, flooring, and roofing felt. An ergonomic deal with permits them to carry out these duties for prolonged intervals with out growing hand or wrist ache, which interprets to elevated productiveness and decreased threat of work-related accidents.
In conclusion, the ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme isn’t merely an aesthetic function however an integral part that contributes on to person well-being and operational effectiveness. By lowering pressure and enhancing grip, the ergonomic design permits for safer, extra comfy, and extra productive use of the device. This design consideration underscores the significance of contemplating human components in device design, significantly in skilled settings the place repetitive duties are widespread.
3. Blade Width (25mm)
The 25mm blade width of the Stanley 10-817 FatMax Xtreme snap-off knife is a key specification figuring out its utility throughout varied purposes. This dimension isn’t arbitrary; it’s intentionally chosen to steadiness slicing capability, blade sturdiness, and precision, influencing the kind of supplies that may be successfully processed and the general efficiency of the device.
-
Chopping Capability and Materials Suitability
The 25mm blade width supplies a considerable leading edge, enabling the device to effectively slice by means of thicker supplies in comparison with narrower blade options. This width is appropriate for slicing duties involving drywall, cardboard, leather-based, and a few kinds of plastic. The broader blade additionally distributes pressure throughout a bigger space, lowering the probability of blade breakage when encountering resistance. Nonetheless, the elevated width might restrict the device’s maneuverability in tight areas or when performing intricate cuts that require finer management. For instance, whereas it excels at scoring drywall, it might not be the optimum alternative for delicate crafting duties.
-
Blade Stability and Sturdiness
A wider blade inherently affords larger stability throughout slicing operations. The elevated floor space supplies enhanced resistance to bending and deflection, leading to straighter and extra managed cuts. That is significantly related when slicing supplies that are inclined to shift or buckle below stress. The 25mm width additionally contributes to the blade’s general sturdiness, as it could possibly stand up to larger stress earlier than fracturing or dulling. The Stanley FatMax Xtreme sequence, specifically, is engineered for heavy-duty use, and the 25mm blade width enhances this design philosophy by guaranteeing the blade can endure the pains of demanding jobsite situations.
-
Drive Utility and Ergonomics
The blade width instantly influences the quantity of pressure required to provoke and keep a lower. A wider blade necessitates larger pressure to penetrate the fabric, particularly if the blade isn’t exceptionally sharp. This may have ergonomic implications, as customers might have to exert extra effort, probably resulting in fatigue over extended use. Due to this fact, the deal with design and general ergonomics of the Stanley 10-817 are essential for mitigating these results, permitting customers to comfortably apply the mandatory pressure with out undue pressure.
-
Relationship to Snap-Off Segmentation
The 25mm blade width works in live performance with the snap-off segmentation design. This width supplies ample materials for a number of segments, every providing a recent leading edge as wanted. The segmentation intervals are designed to optimize the usage of the blade materials whereas sustaining ample structural integrity for every phase. The 25mm width permits for a steadiness between the variety of segments and the sturdiness of every phase, contributing to the general longevity and worth of the blade. The effectivity of the snap-off mechanism is crucial to completely understand the advantages of this design.
In summation, the 25mm blade width is a defining attribute of the Stanley 10-817 FatMax Xtreme snap-off knife, influencing its slicing capability, sturdiness, ergonomics, and the effectiveness of its snap-off segmentation. This dimension is fastidiously thought-about to optimize the device’s efficiency throughout a broad vary of purposes, solidifying its place as a flexible and dependable slicing instrument.
4. Sturdiness
Sturdiness is a paramount consideration within the design and collection of any slicing device, and it performs a very vital function in evaluating the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This attribute dictates the device’s lifespan, its capacity to face up to demanding work environments, and its general worth proposition. The “FatMax Xtreme” designation itself suggests an emphasis on robustness and longevity.
-
Materials Composition and Development
The sturdiness of the Stanley 10-817 stems from the supplies utilized in its building. Excessive-carbon metal is usually employed for the blade to supply a steadiness of hardness and toughness, resisting put on and fracture. The deal with usually incorporates impact-resistant polymers or composite supplies designed to face up to drops, impacts, and publicity to harsh chemical compounds or solvents. The standard of the supplies and the precision of the manufacturing processes instantly have an effect on the device’s capacity to endure extended use and opposed situations. As an example, a building employee utilizing the knife every day on a job web site requires a device able to withstanding fixed abrasion and potential unintentional impacts.
-
Blade Phase Integrity and Break Resistance
The snap-off design necessitates a blade with fastidiously engineered segmentation. The integrity of those segments and their resistance to untimely breakage are essential for sturdiness. A blade that snaps prematurely or fails to interrupt cleanly compromises security and reduces the device’s usability. The design and manufacturing processes should guarantee constant and predictable breaking factors whereas sustaining the energy of every phase. When slicing thick cardboard or a number of layers of fabric, a blade with weak segments would shortly turn into unusable, highlighting the significance of phase integrity.
-
Deal with Ergonomics and Structural Integrity
Whereas the ergonomic design of the deal with contributes to person consolation, it additionally impacts the device’s general sturdiness. A deal with that’s poorly hooked up or liable to cracking below stress will render the device unusable, whatever the blade’s situation. The deal with have to be securely mounted to the blade housing and able to withstanding vital pressure with out deformation or failure. Tradespeople making use of substantial stress to the knife whereas slicing by means of dense supplies require a deal with that maintains its structural integrity, stopping slippage or breakage.
-
Corrosion Resistance
Publicity to moisture and corrosive substances can considerably degrade the sturdiness of a slicing device. The Stanley 10-817 usually incorporates coatings or finishes on the blade and deal with to boost corrosion resistance. That is significantly essential in environments the place the device could also be uncovered to humidity, saltwater, or chemical compounds. A knife utilized in plumbing or marine purposes, for instance, requires enhanced corrosion resistance to stop rust and keep its performance over time.
The aspects of fabric composition, blade phase integrity, deal with building, and corrosion resistance collectively decide the general sturdiness of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. These components are interconnected, and a weak point in anybody space can compromise the device’s lifespan and efficiency. The “FatMax Xtreme” designation displays a deliberate engineering effort to maximise these features, making a device that may stand up to the calls for {of professional} use and supply long-term worth.
5. Snap-off Mechanism
The snap-off mechanism is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, instantly influencing its performance and person expertise. This mechanism permits the person to reveal a recent, sharp leading edge by breaking off a boring phase of the blade, thereby eliminating the necessity for sharpening and increasing the blade’s usable life.
-
Mechanism Parts and Operation
The snap-off mechanism usually includes a slider or push-button that advances the blade, a locking mechanism to safe the blade on the desired extension, and pre-scored segments alongside the blade’s size. To show a brand new leading edge, the person extends the blade, aligns the boring phase with a delegated breaking level, and applies stress to snap it off, usually utilizing a built-in breaker or pliers. The effectiveness of this mechanism depends upon the precision of the blade segmentation and the reliability of the slider and locking parts. A malfunctioning locking mechanism can result in blade slippage, posing a security hazard.
-
Security Options and Issues
The design of the snap-off mechanism incorporates security options to attenuate the chance of harm. These options embody a strong locking mechanism to stop unintentional blade retraction, a contoured deal with for safe grip, and typically, a blade snapper to securely break off boring segments. Nonetheless, the person should train warning when snapping off blade segments to keep away from cuts or flying particles. Correct coaching and adherence to security tips are important for the protected and efficient use of this mechanism. The mechanism’s reliability contributes to the general security profile, the place a poorly designed mechanism might trigger unpredictable blade snapping.
-
Materials Composition and Sturdiness of the Mechanism
The supplies used within the snap-off mechanism’s building considerably affect its sturdiness and longevity. Excessive-quality steel or bolstered polymers are sometimes employed to face up to the repeated stress of blade extension, retraction, and locking. The mechanism’s resistance to put on and tear instantly impacts the device’s lifespan and its capacity to take care of constant efficiency over time. The Stanley 10-817 FatMax Xtreme, with its emphasis on sturdiness, usually incorporates sturdy supplies in its snap-off mechanism to make sure dependable operation below demanding situations. An affordable mechanism results in speedy put on, making the general device ineffective.
-
Upkeep and Substitute
The snap-off mechanism requires minimal upkeep, usually involving occasional cleansing to take away particles that would impede its operation. Nonetheless, the mechanism’s parts are topic to put on and tear, and finally, substitute could also be crucial. The supply of substitute elements and the convenience of disassembly and reassembly are components that affect the device’s long-term worth. A well-designed mechanism permits for simple blade substitute and, in some instances, component-level repairs, extending the device’s service life. The complexity of the mechanism can deter customers from trying repairs, emphasizing the worth of a strong, long-lasting design.
In conclusion, the snap-off mechanism is an integral element of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, instantly impacting its usability, security, and longevity. The design, supplies, and operation of this mechanism are essential issues in evaluating the device’s general efficiency and suitability for varied slicing duties. The mechanism’s reliability, mixed with correct person approach, permits environment friendly and protected use of the device.
6. FatMax Xtreme Sequence
The “FatMax Xtreme Sequence” represents a product line from Stanley recognized for enhanced sturdiness and efficiency traits. The “Stanley 10-817 25mm FatMax Xtreme snap-off knife” is a particular product inside this sequence, inheriting the sequence’ design rules and materials decisions supposed to supply superior resilience in demanding purposes. The sequence designation signifies the knife is engineered to face up to harsher situations and extra frequent use in comparison with normal Stanley choices. As an example, the deal with materials could also be upgraded to face up to increased affect forces, or the blade locking mechanism could also be bolstered to withstand put on. This affiliation results in an expectation of larger reliability and prolonged lifespan for the knife. The combination of “FatMax Xtreme Sequence” parts within the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” creates a product designed for skilled use.
A sensible consequence of this connection is the knife’s suitability to be used in building, industrial, or different demanding environments. Professionals reminiscent of electricians, plumbers, and carpenters usually require instruments able to withstanding every day use and potential publicity to harsh situations. The “FatMax Xtreme Sequence” designation alerts to those customers that the knife is designed to satisfy these necessities. The improved sturdiness traits present a level of confidence, probably lowering the frequency of replacements and minimizing downtime attributable to device failure. A industrial building crew, for instance, would possibly select the 10-817 attributable to its status inside the FatMax Xtreme lineup, resulting in fewer interruptions attributable to device malfunction.
In abstract, the “FatMax Xtreme Sequence” designation is a essential element of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife,” influencing materials choice, design options, and general efficiency expectations. The connection implies a give attention to enhanced sturdiness and suitability for demanding purposes, translating to tangible advantages for skilled customers. Though challenges associated to device upkeep and applicable utilization stay, the affiliation with the “FatMax Xtreme Sequence” supplies a stage of assurance concerning the knife’s capacity to face up to rigorous use.
7. Mannequin Identification (10-817)
The mannequin identification code “10-817” serves as a singular identifier for a particular configuration of the Stanley 25mm FatMax Xtreme snap-off knife. This code is essential for distinguishing this specific device from different comparable fashions inside the Stanley product line and for precisely referencing its specs, substitute elements, and associated documentation.
-
Specification Precision
The “10-817” designation ensures that customers and retailers can exactly establish the device’s traits, together with blade width, deal with design, and particular options inside the FatMax Xtreme sequence. For instance, a elements provider can use this code to verify {that a} substitute blade is appropriate with the supposed device, stopping errors in ordering and guaranteeing correct performance. The dearth of a exact identifier might result in the collection of incompatible parts, affecting efficiency and security.
-
Guarantee and Help
The mannequin quantity is crucial for guarantee claims and buyer help inquiries. Stanley and its approved service suppliers use this code to confirm the device’s authenticity and decide the applicability of guarantee protection. The absence of a sound mannequin quantity or an try to assert guarantee on a counterfeit product would seemingly end in denial of service. This code safeguards each the producer and the buyer towards fraudulent actions.
-
Stock Administration and Logistics
Retailers and distributors depend on the “10-817” designation for environment friendly stock administration and logistics. This code permits correct monitoring of inventory ranges, streamlined order processing, and correct categorization of the device inside product catalogs. The usage of standardized mannequin numbers reduces the chance of delivery errors and ensures that clients obtain the proper product. An inaccurate or lacking mannequin quantity might disrupt provide chains and result in buyer dissatisfaction.
-
Product Documentation and Security Info
The “10-817” identifier is instantly linked to particular product documentation, together with person manuals, security directions, and technical specs. This documentation supplies customers with important data on the right use, upkeep, and potential hazards related to the device. Entry to correct documentation is essential for guaranteeing protected operation and maximizing the device’s lifespan. With out a particular mannequin quantity, finding and referencing the proper documentation can be considerably tougher, probably growing the chance of accidents or improper dealing with.
In conclusion, the mannequin identification code “10-817” is an indispensable ingredient of the Stanley 25mm FatMax Xtreme snap-off knife. It facilitates exact specification, guarantee help, environment friendly stock administration, and entry to essential product documentation, contributing to the general reliability and worth of the device. This identifier isn’t merely an arbitrary quantity however a key element of the product’s identification and its integration inside the broader Stanley ecosystem.
Steadily Requested Questions
This part addresses widespread inquiries and considerations concerning the Stanley 10-817 25mm FatMax Xtreme snap-off knife, offering readability on its options, utilization, and upkeep.
Query 1: What distinguishes the FatMax Xtreme sequence from different Stanley snap-off knives?
The FatMax Xtreme sequence emphasizes enhanced sturdiness and robustness in comparison with normal Stanley knives. This usually interprets to stronger supplies within the deal with building, a safer blade locking mechanism, and an general design supposed to face up to rigorous use and demanding work environments. The particular enhancements current within the 10-817 mannequin are aligned with this core precept.
Query 2: How does one safely eliminate snapped-off blade segments?
Snapped-off blade segments pose a laceration hazard and have to be disposed of responsibly. The advisable apply entails accumulating the segments in a puncture-resistant container, reminiscent of a heavy-duty plastic bottle or a delegated sharps container. This container needs to be clearly labeled to point its contents and disposed of in accordance with native rules for sharp waste disposal.
Query 3: What sort of blade substitute is advisable for the 10-817 mannequin?
The Stanley 10-817 25mm FatMax Xtreme snap-off knife is designed to just accept 25mm snap-off substitute blades. It’s advisable to make use of real Stanley substitute blades or these particularly advisable by Stanley for optimum efficiency and security. Utilizing non-compatible blades might compromise the knife’s performance and improve the chance of accidents.
Query 4: What upkeep is required to make sure the longevity of this device?
Minimal upkeep is required for the Stanley 10-817. Common cleansing to take away gathered particles from the blade slider and locking mechanism is advisable. A dry fabric is usually ample; keep away from utilizing extreme lubricants, as they will appeal to filth and hinder the mechanism’s operation. Inspecting the blade locking mechanism periodically for indicators of damage or harm can be advisable.
Query 5: What are the first security precautions to watch when utilizing a snap-off knife?
Security precautions embody all the time retracting the blade totally when not in use, utilizing applicable private protecting tools reminiscent of gloves and eye safety, and snapping off blade segments fastidiously and away from oneself and others. By no means apply extreme pressure when slicing, and all the time make sure the workpiece is securely supported. A pointy blade is safer than a boring blade, as much less pressure is required.
Query 6: Can the blade locking mechanism be adjusted or tightened if it turns into free?
The blade locking mechanism within the Stanley 10-817 is usually not designed for person adjustment. If the locking mechanism turns into free or fails to securely maintain the blade, it might point out put on or harm. In such instances, the device needs to be inspected by a certified technician or changed to keep away from potential security hazards. Making an attempt unauthorized repairs might void the guarantee and compromise the device’s integrity.
In essence, accountable use, correct disposal, and adherence to security tips are paramount when working the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
The next part will elaborate on sensible purposes of the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
Optimizing Utility
To maximise the efficiency and lifespan of this device, adherence to particular tips is advisable. The next ideas promote protected and environment friendly operation.
Tip 1: Choose Applicable Blade Extension. Lengthen the blade solely to the minimal size required for the duty at hand. Extreme extension will increase the chance of blade breakage and compromises slicing precision. Make sure the locking mechanism is totally engaged earlier than making use of stress.
Tip 2: Make use of Appropriate Chopping Angle. Preserve a shallow slicing angle to attenuate stress on the blade. Keep away from twisting or bending the blade throughout use, as this may result in untimely put on or fracture. Use a managed, deliberate movement.
Tip 3: Make the most of Applicable Chopping Floor. Make use of an acceptable slicing floor, reminiscent of a self-healing mat or a bit of scrap materials. Keep away from slicing instantly on onerous surfaces like concrete or steel, as this dulls the blade quickly and will increase the chance of slippage.
Tip 4: Preserve Cleanliness. Commonly clear the blade and the inner mechanism to take away gathered particles. Use a dry fabric to wipe down the device after every use. Keep away from utilizing solvents or lubricants that would degrade the plastic parts.
Tip 5: Eliminate Blade Segments Responsibly. Gather snapped-off blade segments in a puncture-resistant container. Securely seal the container and eliminate it in accordance with native rules for sharps waste. By no means discard free blade segments typically trash receptacles.
Tip 6: Retailer the Knife Safely. When not in use, totally retract the blade and have interaction the locking mechanism. Retailer the knife in a delegated location away from youngsters and unauthorized customers. Think about using a device pouch or holster for protected transport.
Tip 7: Substitute Blades Promptly. Substitute the blade when it turns into boring or broken. Making an attempt to pressure a boring blade will increase the chance of slippage and harm. Use solely real Stanley substitute blades or these particularly advisable for the 10-817 mannequin.
Adhering to those tips extends the service lifetime of the knife, and enhances person security. Correct dealing with and storage are essential.
This concludes the sensible ideas part. A summation of the important thing factors of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” follows.
Conclusion
This exploration of the Stanley 10-817 25mm FatMax Xtreme snap-off knife has detailed its key options, encompassing blade segmentation, ergonomic deal with design, blade width issues, inherent sturdiness, the performance of its snap-off mechanism, its affiliation with the FatMax Xtreme sequence, and the importance of its mannequin identification. It has established the device as a mix of sensible design parts supposed to satisfy skilled wants, providing a steadiness between utility, security, and longevity.
In abstract, the Stanley 10-817 features as a consultant of its device class, embodying design decisions tailor-made to maximise effectivity and stand up to demanding use instances. Its worth proposition rests in its capacity to ship constant efficiency with applicable dealing with. As device designs evolve, the rules evident on this mannequin might proceed to tell future improvements. The person’s adherence to security tips and advisable practices stays paramount in realizing its supposed advantages.
